Best Therapure Filter Clean & Replacement: All Model Guide 2021

Therapure is the best air purifier when it comes to permanent HEPA filters. You don’t spend much on Therapure filter, maintenance when you have a permanent filter air purifier. You simply clean and reuse them till they last.

You save a lot of money from maintaining an air purifier as well as cutting down on plastic waste, makes it even better.

All good things end here, you need to clean a permanent HEPA-type filter and if it’s your first time then it can be a huge task without knowing where to open or push this air cleaning machine.

Here I have covered all Therapure TPP air purifier currently present in the market. You can easily clean your Therapure TPP50 to TPP640S.

Down below, you get step by step how to clean the Therapure filter inside without damaging your air purifier. More or less, all Therapure air purifier cleaning procedure is similar, however, I’ve explained each model individually for any difference as well as for your better understanding.

Make sure you turn off & unplug your Therapure air purifier before cleaning and removing anything from it.

How To Clean Therapure TPP50 Air Purifier Filter

The cleaning process of the TPP50 is different from other Therapure TPP models because it is plugged into the socket. Just follow these 4 simple steps and you are done:

Best Therapure Filter Clean & Replacement: All Model Guide
Best Therapure Filter Cleaning Guide
  1. Remove the air purifier from the wall outlet.
  2. Remove the 2 collector blades as shown in the picture from the bottom of the air purifier housing.
  3. Wipe the blades clean using a dry soft cloth or paper towel.
  4. Install the collection blades in reverse order and done.

If you are using wet cloth then make sure collection blades are not installed wet or damp. Let them dry for 24 hours before inserting them back into the air purifier.

How Often Should I Clean the Therapure TPP50 Filter?

As per the manufacturer recommendations, you should clean collector blades once in 15 days, however, it depends on your air quality in your place. If it is not clean then you can clean TPP50 filter once in a week.

How To Clean Therapure TPP100 Air Purifier Filter

Cleaning the TPP100 permanent HEPA-type filter can be a little different due to its shape when compared with the other TPP models.

How To Clean Therapure TPP100 Air Purifier Filter
Best Therapure Filter Cleaning Guide
  1. Unscrew the Filter Lock Mechanism at the bottom of the unit by turning it counter-clockwise.
  2. Remove the inlet grille from the unit and then take out the HEPA-type filter from the air inlet grill.
  3. To clean the permanent HEPA-type filter, use a vacuum cleaner with the brush or crevice attachment for the inlet and outlet side of the filter.
  4. Insert the HEPA-type filter back into the inlet grill.
  5. Put the inlet grill back onto the filter lock mechanism.
  6. Reinsert the Filter Lock Mechanism with the grill & filter back into the TPP100 through the bottom of the unit.

In this Therpure TPP100 air purifier, do not use water or any household cleaners or detergents to clean the permanent HEPA-type filter. Otherwise, you’ll damage the permanent HEPA-type filter.

How Often Should I Clean the Therapure TPP100 Filter?

You should clean the Therapure TPP100 air purifier at least once in a month but it can be less depending on the air quality, if it’s polluted then you can clean frequently like twice in a month.

How To Clean Therapure TPP220H & TPP230H Filter

Here, I have to combine Therapure TPP220H and Therapure TPP230H together because the cleaning process is exactly the same for both purifiers. Always clean your permanent HEPA type filter each time the clean filter indicator light turns on.

After the first use, the filter may appear stained which is normal and do not worry it does not affect performance.

How To Clean Therapure TPP220H & TPP230H Filter
Best Therapure Filter Cleaning Guide
  1. Press down the locking latch located at the top to take the inlet grill off.
  2. Grip the left and right frames of the permanent HEPA type filter through the indentations on the sides of the filter enclosure and remove the filter.
  3. Use a vacuum cleaner to clean the permanent HEPA type filter, use the brush or crevice attachment. Clean both the inlet and outlet side of the filter
  4. Once the permanent HEPA type filter is cleaned, reinsert it back into the TPP20 & TPP230H filter
  5. Plugin the unit and hold down timer and then Power On button for 3 seconds. The clean filter light will go off and your cleaning maintenance is done.

Do not use water or any household cleaners or detergents to clean the permanent HEPA type Filter.

How Often Should I Clean the Therapure TPP220/TPP230H Filter?

You should clean Therapure TPP220 & TPP230H air purifier permanent HEPA-type filter at least once a month. However, depending on the air quality at your place, you may want to clean it more often for high airborne pollutants in the air.

How To Clean Therapure TPP240D, TPP440, TPP540, TTP620, TTP630, TPP640S Filter

Here listed all 6 models has exact same filter removal & cleaning process. Therefore, you can follow the steps for cleaning the permanent HEPA-type filter on these models.

How To Clean Therapure TPP240D, TPP440, TPP540, TTP620, TTP630, TPP640S Filter
Best Therapure Filter Cleaning Guide
  1. Remove the inlet grill from the air purifier by pressing down on the locking latch located on the top of the grill.
  2. Grip the left and right frames of the permanent HEPA type filter through the indentations on the sides of the filter enclosure and remove the filter.
  3. Use a vacuum cleaner to clean the permanent HEPA type filter, use the brush or crevice attachment. Clean both the inlet and outlet side of the filter. (Clean the cracks as much as you can)
  4. Once the permanent HEPA type filter is cleaned, reinsert it back into the filter
  5. Plugin the unit and hold down timer and then Power On button for 3 seconds. The clean filter light will go off and your cleaning maintenance is done.

Due to new features on certain models, below I’ve included any other things you’ll need to be aware of when it comes to your filter based on your TPP model.

How Often Should I Clean the Therapure TPP240D, TPP440, TPP540, TTP620, TTP630, TPP640S Filter?

These Therapure air purifiers come with a Clean Filter Indicator light to know when is the time to clean them. However, it is recommended to clean the filter once in 30 days. This makes sure the durability of the filter as well as an air purifier.

How To Reset Therapure TPP240D/TPP440/TPP540 Clean Filter Indicator Light?
Best Therapure Filter Guide

How To Reset Therapure TPP240D/TPP440/TPP540 Clean Filter Indicator Light?

To reset the Clean Filter Indicator light, press and hold the Timer & On/Off button for 3 seconds.

The Clean Filter Indicator light should flash 3 times and then turn off.

How To Reset Therapure TTP620, TTP630, TPP640S Filter Clean Filter Indicator Light

The TTP620, TTP630, TPP640S filters come with a small difference when it comes to resetting the Clean Filter Indicator as compare to the listed Therapure air purifiers.

To reset the Clean Filter Indicator light, press and hold the Ion & UV/VOC button (instead of power+Timer) for 3 seconds. The Clean Filter Indicator Light will turn off meaning it’s been reset.

Last Thoughts

Hopefully, this how to clean Therapure air purifier guide is helpful that I’ve used from the manuals of Therapure Air Purifier as well as other online sources to give you informative articles.

Therapure TPP Manuals For All TPP Models

TPP50, TPP100, TPP220, TPP230D, TPP240D, TPP240, TPP440, TPP540, TPP620, TPP630, TPP640

Related Topics:

8 Best Place To Put Air Purifier To Work Effectively
Best Air Purifier Vs Humidifier Comparison & review
13 Perfect Ways How To Remove Dust From Air

Leave a Comment